Publicité
Les langues disponibles
Les langues disponibles
1
► 1. Trigger
2.
Hold the contact element pressing firmly and pull
the trigger.
Fuel gas is combusted and the nail is driven.
3.
Further driving can be initiated only after both the
contact element and the trigger are released.
Anti dry fire mechanism
This mechanism prevents the tool from firing without
nail.
Dry fire prevention automatically functions when the
rest of nails get to the last 9-11 pieces.
Jammed nailer
WARNING:
•
Always be sure to remove the fuel cell and the
battery cartridge before clearing a jam.
CAUTION:
•
Do not use deformed nails or nail strip. Failure
to do so causes poor nail feeding.
Follow the removing nail procedure and remove the
nails in the magazine.
1
2
► 1. Latch 2. Door
Open the latch and release the door, then remove the
jammed nail.
MAINTENANCE
CAUTION:
•
Always remove the fuel cell, the battery car-
tridge and nails before attempting to perform
inspection or maintenance.
•
Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Maintenance after daily work
At the end of daily work, conduct an end-of-workday routine.
These simple steps are based on maintaining the safety
and performance of the tool.
Before leaving the work site:
•
Remove the battery cartridge and store in a
tool-carrying case. Always use the tool-carrying
case for transporting and storing the tool.
•
Dispose of all empty cells where they will not be
found by children, crushed, punctured or burned.
When you get home:
•
Place the battery cartridge in its charger if it needs
charging as indicated by the red indication lamp.
•
Wipe the tool with a clean, soft cloth.
•
Check the filter and clean if it is dusty.
Cleaning the air filter
► 1. Filter cover
► 1. Filter cover 2. Filter
10 ENGLISH
1
1
2
Publicité
