Setting The Clock And Timer; To Set The Time Of Day; To Set The Timer - Fulgor Milano Sofia Guide D'utilisation Et D'entretien

The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the clock displays the
time 12:00 AM .
The clock time will appear during all oven operations except when there is the timer or any timed cooking operations running.
The oven is preset to a 12-hour clock and indicates

To Set the Time of Day

1. Touch TIME until the display shows the "SET TIME" writing.
+
-
2. Touch or to set the desired time, the hours will begin
flashing: continue until the correct hour value and
indication is selected.
3. Touch TIME again to confirm the hour and minutes will start
flashing.
+
-
4. Touch or to set the desired minutes value or hold the
key to change by 10 minute steps.
5. Touch TIME again or wait for 5 seconds in order to confirm
the time.
NOTE: The Time of Day can never be set if any time function is
already set: first delete all the active time functions.

9 - Setting the Clock and Timer

and .
AM PM

To Set the Timer

1. Touch TIME
+
2. Touch
AM or PM begin flashing: continue until the desired value is set.
3.Touch TIME
flashing.
+
4. Touch
key to change by 10 minute steps.
5. Touch TIME
the time.
6. "TIMER" will be steadily displayed.
7. When the time ends, reminder beeps will sound for 15
minutes or until the
8. Timer format is usually HR:MIN, switching into MIN:SEC
during the last minute.
9. The displayed value is always rounded to thelower minute.
until the display shows the "TIMER" writing.
-
or to set the desired timer value, the hours will
again to confirm the hour and minutes will start
-
or to set the desired minutes value or hold the
again or wait for 5 seconds in order to confirm
TIME key is pressed.
EN
11