Hitachi WH 14DSDL Mode D'emploi page 15

Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level:
Measured A-weighted sound pressure level:
Uncertainty KpA: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Impact tightening of fasteners of the maximum capacity
of the tool:
Vibration emission value
Uncertainty K = 1.5 m/s 2
The declared vibration total value has been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
It may also be used in a preliminary assessment of
exposure.
WARNING
The vibration emission during actual use of the power
tool can differ from the declared total value depending
on the ways in which the tool is used.
Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
WH14DSDL: 104 dB (A)
WH18DSDL: 105 dB (A)
WR14DSDL: 104 dB (A)
WR18DSDL: 104 dB (A)
WH14DSDL: 93 dB (A)
WH18DSDL: 94 dB (A)
WR14DSDL: 93 dB (A)
WR18DSDL: 93 dB (A)
a
= WH14DSDL: 13.4 m/s
h
WH18DSDL: 10.3 m/s
WR14DSDL: 9.8 m/s
WR18DSDL: 11.7 m/s
2
2
2
2
English
14