Ryobi RPD1010 Traduction Des Instructions Originales page 3

WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
Save all warnings and instructions for future reference
DRILL SAFETY WARNINGS
a) Wear ear protectors when impact drilling. Exposure
b) Use auxiliary handle(s), if supplied with the tool.
c) Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord
d) Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
e) Wear safety goggles to protect your eyes from flying
Additional safety warnings
INTENDED USE
a)
b) Drilling in metals: steel, brass, aluminum sheets,
stainless steel and pipe (do not use impact drilling on
c) Drilling in masonry: stone and masonry (use impact
drilling), wall tiles (use ordinary drilling first, then impact
Do not use this product in any other way other than those
MAINTENANCE
WARNING
cleaning, performing maintenance, or when the product
a)
Use of any other parts may create a hazard or cause
b)
c) Do not at any time let brake fluids, gasoline, petroleum-
d) Electric tools used on fiberglass material, wallboard,
accelerated wear and possible premature failure
because the fiberglass chips and grindings are highly
Consequently, we do not recommend using this tool for
you do work with any of these materials, it is extremely
e) Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
f) If the power supply cord is damaged, it must be replaced
g) For greater safety and reliability, all repairs should be
h) All of the bearings in the product are lubricated with
a sufficient amount of high grade lubricant for the life
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
SYMBOLS
Safety Alert
Class II, double insulated
No-load speed
Wood
EN
English
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
EL
TR
1