1. L ean the flat screen vertically on a soft, large surface or a wall and protect it
of scratches and overturning.
2. Install adapter brackets (B) and (C) with the washers (M-F) and the fitting
screws, matching to your flat screen on the top and bottom side as shown.
Make sure that the slots are on the flat screens top side.
4.3.2 Flat screens with arched back
1. Apart from the following working step - proceed like shown in chapter 4.3.1.
2. Mount the fitting TV spacers (M-G) and/or ( M-H) between adapter brackets
(B) / (C) and flat screen like shown.
Fig. 9: Flat screens with flat back
Fig. 10: Flat screens with arched back
23