Technical Specifications - iKarus Lama Manuel D'utilisation

This model helicopter is not a toy.
Building and especially operating it requires special knowledge. Mistakes and
sloppiness during assembly, maintenance and operation may cause damage to
property and/or persons. Even as this helicopter comes preassembled, it is your
responsibility to check before every fl ight that all components are assembled
properly and are undamaged. Make yourself aware of any possible dangers as
you are responsible for the correct maintenance and operation of this model
helicopter.
The Lama consists of several mechanical components (helicopter chassis,
electric motors, pushrods, rotor blades) and the electronic equipment (receiver,
servos, electronic mixer, gyro and transmitter). Just like a full size helicopter,
the Lama can move around all axes and fl y in any direction. The special design
allows you to enjoy the fi rst successful fl ights soon.
Technical Specifi cations
Helicopter:
Length : 430 mm (16.9 in)
Fuselage Width: 90 mm (3.5 in)
Heigth: 170 mm (6.7 in)
Weigth: 225 g (8 oz)
Battery: 7,4 V, 800 mAh, Lithium-Polymer
Attention!
Read the entire manual
before attempting your fi rst fl ight!
The Helicopter
1
Remote Control:
Channels:
RF Modulation:
Operation Voltage:
Current Consumption: approx. 150 mA
4
FM
9,6 - 12 V