Publicité
Les langues disponibles
Les langues disponibles
For a complete listing of accessories refer to your MILWAUKEE Electric Tool catalog. To obtain a catalog, contact your local distributor or a service
center listed on the back cover of this operator's manual.
12 Volt Power Plus Battery Pack (2.0 A/H)
Cat. No. 48-11-1900
Fits MILWAUKEE Charger Cat. No. 48-59-0240.
12 Volt Power Plus Battery Pack (1.4 A/H)
Cat. No. 48-11-1950
Fits MILWAUKEE Charger Cat. No. 48-59-0240 and 48-59-0231.
Power Plus II Charger 120 Volt
Cat. No. 48-59-0240
For charging Power Plus Battery Pack Cat. No. 48-11-1900 and
48-11-1950.
Power Plus Charger 120 Volt
Cat. No. 48-59-0231
For charging Power Plus Battery Pack Cat. No. 48-11-1950.
Steel Carrying Case
Cat. No. 48-55-0515
Driver/Drill Accessory Kit
Cat. No. 48-30-0101
Includes 1/4" socket driver, 6F-7R slotted bit, #1 and #2 Phillips bits, 1/4"
and 3/16" twist bits, and two 1/8" twist bits.
Keyless Chuck
Cat. No. 48-66-0375
Rugged nylon housing with rust resistant nickel plated jaws and body.
For cordless drills with 3/8" - 24 thread.
Keyless Chuck
Cat. No. 48-66-0410
Rugged nylon housing with rust resistant nickel plated jaws and body.
For cordless drills with 1/2" - 20 thread.
Jobbers Length Twist Drill Sets
13 Piece Set
Cat. No. 48-89-0030
Sizes 1/16" to 1/4" by 64ths.
15 Piece Set
Cat. No. 48-89-0020
Sizes 1/16" to 1/2" by 32nds.
21 Piece Set
Cat. No. 48-89-0015
Sizes 1/16" to 3/8" by 64ths.
29 Piece Set
Cat. No. 48-89-0010
Sizes 1/16" to 1/2" by 64ths.
page 8
ACCESSORIES
WARNING!
Always remove battery pack before changing or
removing accessories. Only use accessories
specifically recommended for this tool. Others
may be hazardous.
Cat. No. 48-11-1900
Cat. No. 48-59-0240
Cat. No. 48-30-0101
Cat. No. 48-89-0020
Cat. No. 48-59-0231
Publicité
