Publicité
17
Technical Information
Connection of the High Vacuum Flange
Installation of ISO-F Flange
For ISO-F flange connections, fix the two flanges with the high
resistance 12.9 screws as shown in the following figure (a protective
screen can optionally be used).
Figure 37
Use the required number of hex screws:
8 for ISO 100 F flange
Tighten the screws with a torque of 35 Nm
TwisTorr 404 FS User Manual / 87-901-048-01 (A.00)
311/326
Publicité
Chapitres
