Publicité
17
Technical Information
Connection of the High Vacuum Flange
Installation of ISO-K Flange
For ISO-K flange connections, fix the two flanges with the clamps
(high resistance 12.9 Agilent IC 63250 DCMZ) as shown in the
following figure (a protective screen can optionally be used).
Figure 60
Use the required number of claw clamps:
Tighten the claw clamps with a torque of 25 Nm.
328/344
18 for ISO 200 flange
18 for ISO 250 flange
TwisTorr 804 FS User Manual / 87-901-052-01
Publicité
Chapitres
