C Marking - Sartorius Miras 2 Mode D'emploi

C Marking

The scale complies with the following
EC Directives and European Standards:
Directive 2004/108/EC:
"Electromagnetic compatibility
(EMC)"
EN 61326-1 Electrical equipment for
measurement, control
and laboratory use
EMC Requirements
Part 1: General requirements
Defined immunity to
interference:
Industrial areas,
continuous, unmonitored
operation
Limitation of emissions:
Residential areas, Class B
Important Note:
The operator shall be responsible for
any modifications to Sartorius equip-
ment or connections of cables not sup-
plied by Sartorius and must check and,
if necessary, correct these modifications.
On request, Sartorius will provide infor-
mation on the minimum operating
specifications (in accordance with the
standards listed above for defined
immunity to interference).
34
Directive 2006/95/EC:
"Electrical equipment designed for use
within certain voltage limits"
Applicable European Standards:
EN 61010 Safety requirements for
electrical measurement,
control, and laboratory
equipment
Part 1:
General requirements
If you use electrical equipment in instal-
lations and under ambient conditions
subject to stricter safety standards than
those described in the manual, you
must comply with the provisions as
specified in the applicable regulations
for installation in your country.