Descriptions Of The Keys - Sartorius Miras 2 Mode D'emploi

Descriptions of the Keys

1) On/Off
"On/off" function will depend on
different power supply conditions.
Use the setup menu for backlight
control and for auto power off.
In Main Mode
§ Off-Mode:
If standby active: Scale is in standby
mode, but there is no display visible
other than mode symbol (no backlight,
no display, no symbols)
If standby not active:
Scale is completely off
§ On-Mode:
Scale is in operation and the display
shows the function that is in use.
In this mode, auto power off function is
invalid.
In Battery Mode
§ Off-Mode: Scale is completely off.
§ On-Mode: Scale is in operation and the
display shows the function that is in use.
Backlight works based on setup menu
In this mode, auto power off function
is valid. After 5, 10 or 15 minutes, the
system shuts off when not in use in
accordance with the setup menu setting.
2) Zero/Arrow-Left (Zero/Left)
Weighing mode: Set scale to zero
Parameter mode: Shift position of digit
to the left
3) Tare/Arrow-Right (Tare/Right)
Weighing mode: Tare the scale
Parameter mode: Shift position of digit
to the right
4) Gross-Net/Arrow-Down (G/N/Down)
Weighing mode: Toggle weight unit
gross/net
Counting mode: Toggle weight unit
gross, net and pcs
Function mode: To scroll down menu
selection
Parameter mode: Reduce digit value by 1
5) Function/Arrow-Up (Fn/Up)
Weighing mode: Switch the scale from
normal weighing mode to application
setup mode
Function mode: Scroll up in menu
selection
Parameter mode:
Increase digit value by 1
6) Print/Enter (Print/Enter)
Weighing mode: Print key
Function mode: Scroll level up in menu
mode/confirm selected menu.
15