Electrolux IK2550BNR Notice D'utilisation page 57

Masquer les pouces Voir aussi pour IK2550BNR:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.
Press the appliance ON/OFF button if
the display is off.
3.
The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "High tem-
perature alarm".
4.
If "dEMo" appears on the display, the
appliance is in demonstration mode.
Refer to "Troubleshooting...".
5.
The temperature indicators show the
set default temperature.
To select a different set temperature refer
to "Temperature regulation".
2.3 Switching off
To switch off the appliance do these
steps:
1.
Press the appliance ON/OFF button
for 5 seconds.
2.
The display switches off.
3.
To disconnect the appliance from the
power disconnect the mains plug
from the power socket.
2.4 Switching off the fridge
To switch off the fridge:
1.
Press the Mode button until the cor-
responding icon appears.
The fridge Off indicator and the fridge
compartment indicator flash.
The fridge temperature indicator
shows dashes.
2.
Press the OK button to confirm.
3.
The fridge Off indicator is shown.
2.5 Switching on the fridge
To switch on the fridge:
1.
Press the fridge temperature regula-
tor.
Or:
1.
Press the Mode button until the cor-
responding icon appears.
The Fridge Off indicator flashes.
2.
Press the OK button to confirm.
3.
The fridge Off indicator goes off.
To select a different set temperature refer
to "Temperature regulation".
2.6 Temperature regulation
The set temperature of the fridge and of
the freezer may be adjusted by pressing
the temperature regulators.
Set default temperature:
• +5°C for the fridge
• -18°C for the freezer
The appliance activates a function mode
that permit to optimize the food preserva-
tion and energy consumption.
Such a function guarantees the maximum
silentness during the performance of the
appliance.
The temperature indicators show the set
temperature.
The set temperature will be reached with-
in 24 hours.
After a power failure the set tem-
perature remains stored.
2.7 Drinks Chill function
The Drinks Chill Minute Minder function is
to be used to set an acoustic alarm at the
preferred time, useful for example when a
recipe requires to cool down a mixture for
a certain period of time, or when a re-
minder is needed in order not to forget
the bottles placed in the freezer for fast
cooling.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The Drinks Chill indicator flashes.
The Timer shows the set value (30 mi-
nutes) for a few seconds.
2.
Press the Timer regulator button to
change the Timer set value from 1 to
90 minutes.
3.
Press the OK button to confirm.
The Drinks Chill indicator is shown.
The Timer start to flash (min).
At the end of the countdown the Drinks
Chill indicator flashes and an audible
alarm sounds:
1.
Remove any drinks contained in the
freezer compartment.
2.
Press OK button to switch off the
sound and terminate the function.
It is possible to deactivate the function at
any time during the countdown:
1.
Press the Mode button until the
Drinks Chill indicator flashes.
ENGLISH
57

Publicité

Table des Matières
loading

Table des Matières