Using The Combination Programmes; Defrosting Food And Liquids; Using The Cooking Programme - SEVERIN MW 7854 Mode D'emploi

3. Press the key.
� The display shows :
0
4. Turn the rotary control
5. Push in the rotary control

6.3 Using the combination programmes

The appliance features two combination programmes:
• COMB1: The microwave function is active for 30% of the pre-
programmed time, while the grill function is active for the remaining
70%.
• COMB2: The microwave function is active for 55 % of the pre-
programmed time, while the grill function is active for the remaining
GB
45 %.
1. Put the food to be heated or cooked in a heat-resistant glass or ceramic
container, and place it on the turntable.
2. Close the door.
3. Press the key.
� The display shows :
0
between and
4. Turn the rotary control
5. Push in the rotary control

6.4 Defrosting food and liquids

1. Put the food to be heated or cooked in a microwave-suitable container
(►'Selecting suitable kitchen utensils', page 27) and place it on the
turntable.
2. Close the door.
3. Press the key.
� The display shows
100
30
and .
00
to set the desired processing time.
to start the cooking process.
and . Press the key again to switch
00
.
to set the desired processing time.
to start the cooking process.
g and .
4. Press the key repeatedly until the display shows the desired weight.
5. Push in the rotary control to start defrosting.
� Once two thirds of the programmed defrosting time has elapsed, the
process stops and a beep signal is heard
6. Open the door.
7. Turn the food over.
8. Close the door.
9. Push in the rotary control to continue the defrosting.

6.5 Using the cooking programme

The appliance offers several cooking programmes for different dishes which
heat the food according to weight/amount and automatically determine the
required power setting and duration of the cooking/heating process.
1. Put the food to be heated or cooked in a heat-resistant glass or ceramic
container, and place it on the turntable.
2. Close the microwave door.
3. Turn the rotary control anti-clockwise, to call up the programme
selection.
� The display shows and
4. Turn the rotary control to select the desired programme.
.
9.