Publicité
Les langues disponibles
Les langues disponibles
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended
could result in a hazardous situation.
5. Battery tool use and care
a) Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on invites
accidents.
b) Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when used
with another battery pack.
c) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
d) When battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects that
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
e) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
6. Service
a) Have your power tool serviced by qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
NOISE/VIBRATION INFORMATION
Measured sound values determined according to EN 60745-1.
WEAR HEARING PROTECTION!
Vibration total values (triax vector sum) determined according to EN 60745-1: The
vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745-1 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to
protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
Publicité
