Preparing For The Measurement - Beurer medical BC 50 Mode D'emploi

Information on the display:
1. Classification of measurements
2. Time and date
3. Systolic pressure
4. Diastolic pressure
5. Pump up, release air (arrow)
6. Calculated pulse value
7. Cardiac arrhythmia symbol
Pulse symbol
8. Battery status indicator
9. User memory /
10. Memory space number/memory display
average value ( A ), morning ( AM ), evening ( PM )
1 2
10
9
8
7
6
5
3
4

4. Preparing for the measurement

Inserting the batteries
• Remove the battery com-
partment lid on the left
side of the device.
• Insert two 1.5 V micro (al-
kaline type LR03) batter-
ies. Make sure that the batteries are inserted the correct way
round. Do not use rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery change symbol
no more measurements are possible and you must replace
all batteries.
All display elements are briefly displayed, 24h flashes in the
display. Now set the date and time as described below.
Battery disposal
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
18
is flashing and E6 appears,