Measuring Blood Pressure - Beurer medical BC 50 Mode D'emploi

Setting the hour format, date and time
This menu allows you to set the following functions, one after
another.
Hour format Date
➔
It is essential to set the date and time. Otherwise, you will not
be able to save your measured values correctly with a date and
time and access them again later.
If you press and hold the M1 or M2 memory button, you
can set the values more quickly.
Hour format
• Press and hold the START/STOP button
for 5 seconds.
• Select the desired hour format using the M1/
M2 memory buttons and confirm with the
START/STOP button
Date
The year flashes on the display.
• Select the year using the M1/M2 memory
buttons and confirm with the START/STOP
button .
The month flashes on the display.
• Select the month using the M1/M2 memory but-
tons and confirm with the START/STOP button
.
Time
➔
.
The day flashes on the display.
• Select the day using the M1/M2 memory buttons and
confirm with the START/STOP button
If the hour format is set as 12h, the day/month dis-
play sequence is reversed.
Time
The hours flash on the display.
• Select the hour using the M1/M2 memory buttons
and confirm with the START/STOP button
The minutes flash on the display.
• Select the minute with the M1/M2 memory but-
tons and confirm with the START/STOP button
.
Once all the data has been set, the device switches off au-
tomatically.

5. Measuring blood pressure

Attaching the cuff
1 2
• Expose your left wrist. Ensure that the circulation of the arm
is not hindered by tight clothing or similar.
Place the cuff on the inside of your wrist.
19
.
.
3