Preparing For The Measurement - Beurer medical BC 57 Mode D'emploi

Information on the display:
1. Classification of the measured values
2. Symbol for Bluetooth
3. Time and date
4. Systolic pressure
5. Diastolic pressure
6. Calculated pulse value
7. Cardiac arrhythmia symbol
Pulse symbol
8. Battery status indicator
9. Release air (arrow)
10. User memory /
11. Memory space number/memory display
average value ( A ), morning ( AM ), evening ( PM )
1 2
11
10
9
8
7
6
transfer
®
3
4
5
System requirements for the Beurer
"HealthManager" PC software.
1. Supported operating systems:
• Windows XP SP3
• Windows Vista SP1 or later
• Windows 7
• Windows 7 SP1
• Windows 8
2. Supported architectures:
• x86 (32 bit)
• x64 (64 bit)
3. Hardware requirements:
• Recommended: at least Pentium 1 GHz or faster with
at least 1 GB RAM
• Free memory on the primary partition of at least:
– x86 – 600 MB
– x64 – 1.5 GB
• Graphic resolution from: 1024 x 768 pixels

4. Preparing for the measurement

Inserting the batteries
• Remove the battery
compartment lid on
the left side of the
device.
• Insert two 1.5 V mi-
cro (alkaline type LR03) batteries. Make sure that the
25