Unit Description; Preparing The Measurement - Beurer medical BC 40 Mode D'emploi

• Repairs must only be carried out by Customer Services or
authorised suppliers.
Before making a claim, please check the batteries first
and replace them if necessary.
• For environmental reasons, do not dispose of
the device in the household waste at the end of
its useful life. Dispose of the device at a suitable
local collection or recycling point. Dispose of the device
in accordance with EC Directive – WEEE (Waste Electri-
cal and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste
disposal.

3. Unit description

1. Display
2. Battery compartment lid
3. Wrist cuff
4. START/STOP button
5. Memory button M
1
5 4
Information on the display:
1. Systolic pressure
2. Diastolic pressure
3. Classification of
measurements
4. Time and date
5. Calculated pulse value
6. Cardiac arrhythmia sym-
bol
7. Pulse symbol
8. Battery replacement sym-
bol
9. Memory space number/
2
memory display average value ( A ) , morning ( AM ) , even-
ing ( PM )
10. Release air (arrow)

4. Preparing the measurement

Insert the batteries
• Remove the battery compartment lid on the right side of
the device.
• Insert two 1.5 V micro (alkaline type LR03) batteries. Make
3
sure that the batteries are inserted the correct way round.
Do not use rechargeable batteries.
• Close the battery compartment lid again carefully.
19
10
9
8
7 6 5
1
2
3
4