Unit Description - Beurer medical BC 58 Mode D'emploi

3. Unit description

Touch screen activation switch
The device features a touch screen display. To prevent the
screen from being activated accidentally, keep the touch
screen activation switch set to "OFF" when the device is
not in use. To operate the device, move the touch screen
activation switch to "ON". When the touch screen display is
touched ("START/STOP" button or "MEM" button), a beep
is output.
Tip: You can switch off the device at any time by setting the
touch screen activation switch to the "OFF" position.
1. Display
2. Memory button MEM
3. START/STOP button
4. USB interface
5. Touch screen activation
switch
6. Battery cover
Icons in the display:
1. Time and date
2. WHO classification
3. Systolic pressure
4. Diastolic pressure
5. Measured pulse
6. „Change battery" icon
7. Pump up, release air (arrow)
8. Memory display (
( ), morning ( ), evening (
9. Cardiac arrhythmia icon
PC kit
With the additionally available accessory set 655.17, con-
sisting of a CD with PC software and a data-transfer cable,
you can evaluate your data extremely effectively.
You will find the installation instructions in the PC kit.
4. Prepare measurement
Inserting battery
the type: 2x1.5 V Micro (Alkaline Type
LR 03). Making absolutely sure that you
insert them with the correct polarity as
marked. Do not use rechargeable batter-
ies.
15
1
9
8
8
7
6
5
), average value
)
2
3
4