Unit Description; Prepare Measurement - Beurer medical BC 19 Mode D'emploi

• Never open the instrument. If these instructions are
not heeded, the warranty will be null and void.
• Never attempt to repair the instrument or adjust it your-
self. We can no longer guarantee perfect functioning if
you do.
• Repairs may only be performed by Beurer Customer
Service or authorized dealers. However, always check
the batteries and replace them if necessary prior to
making any complaint.
• The appliance should be disposed of according
to Regulation 2002/96/EC-WEEE (Waste Electri-
cal and Electronic Equipment). In case of queries,
please contact the municipal authorities responsible
for waste disposal in your area.

3. Unit description

8
7
4
1
2
1. Battery cover
2. Display
3. Loudspeaker
4. START/STOP
button
5. Memory button M
6. Wrist cuff
3
7. Volume button
5 louder +/quieter -
8. WHO - LED
6
Icons in the display:
1. Systolic pressure
2. Diastolic pressure
3. Pulse rate
4. Pulse icon / Cardiac
arrhythmia icon
5. Number of memory space
6. Time and date
7. Inflate/deflate arrow
8. 'Change battery' icon
9. WHO classification
10. Memory Zones

4. Prepare measurement

Inserting battery
• Remove the battery cover (left side of the unit).
• Insert two 1.5 V micro batteries (alkaline, type LR 03).
Make absolutely sure that you insert the batteries with
the correct polarity as marked. Do not use recharge-
able batteries.
• Replace the battery cover carefully.
If the 'change battery' icon
ment is no longer possible and you must replace all
the batteries.
Once batteries have been removed from the device, the
time must be reset. Any measurement results that have
been stored are however retained.
13
10
9
8
7
6
5 4
is displayed, measure-
1
2
3