Special Functions; Pabx / Supplementary Services - switel DC62 Série Mode D'emploi

Special Functions

Multiple base stations
You can increase the range of your handset by registering it on several base stations.
The handset can be registered on up to 4 different base stations simultaneously. Each
base station requires its own telephone line socket. Connections can be used with the
same call number or with different ones.
Special Functions
10
Dialling mode
The telephone can be operated in analogue exchanges (PULSE mode) as well as new,
digital exchanges (TONE/DTMF mode). The dialling mode is controlled via the menu.
Chapter 5 indicates the position in the menu.

PABX / Supplementary Services

11
R−button on private branch exchanges
If the telephone is connected to a private branch exchange, functions such as transfer-
ring calls and automatic call back can be used via the R button. Refer to the operating
manual provided with your private branch exchange as to which Flash time must be set
in order to use these functions. The sales outlet where you purchased the exchange
can provide information as to whether the telephone will work properly with the ex-
change. The Flash time is set using the menu. Chapter 5 indicates the position in the
menu.
Dialling pause
When using private branch exchanges, it is necessary to dial an access code to obtain
the dialling tone for an outside line. When using some older private branch exchanges,
it takes a little time before the dialling tone becomes audible. In the case of such private
branch exchanges, a dialling pause can be inserted after the number for an outside line
in order to continue dialling directly without having to wait for the dialling tone. The dial-
ling pause is inserted by pressing and holding the P button for 3 seconds.
The actual phone number is dialled a certain time after the number for an outside line.
114
Calls in progress cannot be transferred from one base station to another.
The dialling pause can also be entered with the phone numbers in the phone
book.