Ryobi OLP1832BX Traduction Des Instructions Originales page 5

■
Keep the product clean of clippings and other materials.
They may become lodged between the jaw and blade.
ADDITIONAL SAFETY WARNINGS
■
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury
within a fraction of a second.
■
Keep handles and grasping surfaces dry, clean, and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of
the tool in unexpected situations.
■
Do not cut where there is a risk of hidden wiring.
■
Do not cut wires.
■
Keep the working area free from wires and cables
(example: fairy lights).
■
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
■
Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above
130° C may cause explosion.
■
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
■
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
■
Keep the area clear of all bystanders, children, and pets
while cutting.
■
When cutting a limb under tension, be alert for spring
back so that you will not be struck when the tension in
the wood fibers is released.
■
Maintain product with care. Keep the cutting edge sharp
and clean for best performance and to reduce the risk
of injury. Follow the instructions for lubricating and
changng accessories.
■
Keep handles dry, clean, and free from oil and grease.
■
Before use and after any impact, check that there are
no damaged parts. Any part that is damaged should be
properly repaired or replaced by an authorised service
centre.
■
If the product is dropped, suffers heavy impact, or
begins to vibrate abnormally, immediately stop the
product and inspect for damage or identify the cause of
the vibration. Any damage should be properly repaired
or replaced by an authorised service centre.
■
Check for damaged parts. Before further use of the
product, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function.
■
Service on the product must be performed by qualified
repair personnel only.
performed by unqualified personnel could result in
injury to the user or damage to the product.
■
Save these instructions. Refer to them frequently and
Service or maintenance
use them to instruct others who may use the product.
If you loan someone the product, loan them these
instructions also to prevent misuse of the product and
possible injury.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING
To reduce the risk of fi re, personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fl uid or allow a fl uid to
fl ow inside them. Corrosive or conductive fl uids, such
as seawater, certain industrial chemicals, and bleach
or bleach-containing products, etc., can cause a short
circuit.
TRANSPORTATION AND STORAGE
■
Stop the product, remove the battery pack, and allow it
to cool before storing or transporting.
■
Clean all foreign material from the product.
■
After each use, clean the body and handles of the
product with a soft, dry cloth.
■
After each use, clean the debris from the blades with a
stiff brush, and then carefully apply a rust-preventative
lubricant before refitting the blade protector. Use
a recommended rust-preventative lubricant spray
to apply an even distribution and reduce the risk of
personal injury from contact with the blades. For
information about suitable spray product, check with
your local authorised service centre.
■
Lubricate the blades lightly before and after use if
necessary using the above method.
■
For transportation in a vehicle, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
■
Store the product in a cool, dry, and well-ventilated
place that is inaccessible to children. Keep away from
corrosive agents such as garden chemicals and de-
icing salts. Do not store outdoors.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, nonconductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English | 3