Using The Teac Global Site - Teac AI-101DA Mode D'emploi

Doing so could damage these items .
o Do not put cloth on top of the unit or place
the unit on top of bedding or thick carpets .
Doing so could cause the unit to overheat
and damage it .
o Do not move the unit during use . The volt-
age supplied to the unit should match the
voltage printed on the rear panel . If you are
in any doubt regarding this matter, consult
an electrician .
o Do not open the body of the unit as this
might result in damage to the circuitry or
cause electric shock . If a foreign object
should get into the unit, contact your
dealer .
o When removing the power plug from the
wall outlet, always pull directly on the plug;
never yank on the cord .
o If a TV is turned on while the unit is on,
static might appear on the T V screen
depending on the characteristics of the TV
broadcast signal . This is not a malfunction of
the unit nor of the TV . If this occurs, put the
unit into standby .
Note about installation
This unit can be used both horizontally and
vertically (on its side) . When using it in a verti-
cal position, attach the included rubber feet to
the four places on the bottom .
Bottom when placed vertically
Rubber feet
Maintenance
Wipe dirt from the top cover and other panel
surfaces using a soft cloth that has been
slightly dampened with a diluted neutral
cleanser .
Do not wipe with chemical cleaning cloths,
thinner or other chemical agents . Doing so
could damage the surface .
V For your safety, disconnect the power
cord from the socket before cleaning.

Using the TEAC Global Site

You can download the dedicated drivers nec-
essary for this unit from the TEAC Global Site:
http://teac-global.com/
1) Open the TEAC Global Site .
2) In the TEAC Downloads section, click the
desired language to open the Downloads
website page for that language .
NOTE
If the desired language does not appear, click
Other Languages .
3) Click the product name in the "Products"
for the users in Europe or "Search by Model
Name" section for the users in North
America or areas other than those men-
tioned above to open the Downloads page
for that product .
4) Select and download the dedicated drivers
that are needed .
7