Automatic Power Saving Function; Using The Teac Global Site; Basic Operation - Teac HA-P90SD Mode D'emploi

Automatic power saving function

This unit will enter sleep mode automatically under the following circumstances.
When used as a headphone amp
o When 30 minutes pass without audio input.
o When 30 minutes pass without headphones being plugged into the PHONES
jack.
During SD card playback
o When the player's auto power saving function is on and the player has not
operated for the set amount of time.
NOTE
To end sleep mode, turn the volume knob counterclockwise until the unit is
turned off.

Using the TEAC Global Site

You can download updates for this unit from the TEAC Global Site:
http://teac-global.com/
1) Open the TEAC Global Site.
2) In the TEAC Downloads section, click the desired language to open the
Downloads website page for that language.
NOTE
If the desired language does not appear, click Other Languages.
3) Click the "Search by Model Name" section to open the Downloads page
for that product. (Users in Europe should click the product name in the
"Products" section instead.)
4) Select and download any updates that are needed.
12

Basic operation

V Complete all other connections before turning the unit on.
o Read the owner's manuals of all devices that will be connected, and
follow their instructions.
o Do not bundle connection cables with the power cord. Doing so could
cause noise.
o Connect all plugs securely.
Playback on an external input device
1
Connect the input source.
2
Turn this unit on.
Set the volume at a low level.
3
Wait until the input source has been selected.
4
Start playback on the input source device.
5
Turn this unit's power/volume knob to adjust
the volume.