Playing Tracks Repeatedly (Repeat Play) - Sony MDS-JA333ES Mode D'emploi

Playing tracks repeatedly
(Repeat Play)
You can play an entire MD repeatedly. This function can
be used with Shuffle Play to repeat all the tracks in
random order (page 27), or with Program Play to repeat
all the tracks in the program you have created (page 27).
You can also repeat a specific track or portion within a
track.
REPEAT
Note
If you turn off the deck or disconnect the AC power cord, the
deck will store the last setting of the repeat play ("Repeat All" or
"Repeat 1") and recall it the next time you turn on the deck.
Repeating all the tracks on the MD
(Repeat All Play)
Press REPEAT repeatedly until "Repeat All" appears in
the display.
When you play an MD, the deck repeats the tracks as
follows:
When the play mode is
Normal play (page 23)
Shuffle Play (page 27)
Program Play (page 27)
To stop Repeat All Play
Press x.
To resume normal play
Press REPEAT repeatedly until "Repeat Off" appears in
the display.
26
GB
Playing tracks repeatedly
` / 1
Z
REPEAT
AyB
H X x
. > z
m M
M
X . >
The deck repeats
All the tracks in sequence
All the tracks in random order
All the tracks in the program
in sequence
Repeating the current track (Repeat 1
Play)
While the track you want to repeat is being played,
press REPEAT repeatedly until "Repeat 1" appears in
the display.
Repeat 1 Play starts.
To stop Repeat 1 Play
Press x.
To resume normal play
Press REPEAT repeatedly until "Repeat Off" appears in
the display.
Repeating a specific portion within a
track (Repeat A-B Play) Z
You can specify one portion within a track to be played
repeatedly. Note that the portion that you specify must be
within the boundaries of a single track.
1
While the deck is playing, press AyB at the
starting point (point A) of the portion to be played
repeatedly.
"REP A-" lights up and "B" flashes in the display.
2 Continue playing the track or press M to locate
the ending point (point B), then press AyB.
"REP A-B" lights up and Repeat A-B Play starts.
To stop Repeat A-B Play and resume normal
play
Press REPEAT or CLEAR.
z
You can set a new starting point and ending point
during Repeat A-B Play
You can change the current ending point to a new starting point,
then specify a new ending point to repeat a portion right after the
current portion.
1 During Repeat A-B Play, press AyB.
The current ending point changes to the new starting point
(point A).
"REP A-" lights up and "B" flashes in the display.
2 Locate the new ending point (point B) and press AyB.
"REP A-B" lights up and the deck starts to repeat the newly
specified portion.