Change The Spray Tip - GreenWorks GPW 1803 Manuel De L'utilisateur

EN
• Release the spray gun trigger (21) to stop water flow
through the spray tip (11).
4.2.1 UNLOCK THE GUN TRIGGER
• Push the trigger safety lock-out (22) down until it clicks
into the slot.
4.2.2 LOCK THE GUN TRIGGER
• Push the trigger safety lock-out (22) up and into it's
original position.
4.3

CHANGE THE SPRAY TIP

Before you change the spray tip:
1. Pull the spray gun trigger to release water pressure.
2. Engage the trigger safety lock-out on the spray gun.
3. Stop the mahcine.
Do not point the spray wand at your face or others'.
①
②
③
WARNING
WARNING
English
4.3.1 NOZZLE TYPE
SPRAY TIP
25
O
40
O
SOAP
4.3.2 INSTALL THE SPRAY TIP
1. Pull back the quick-connect collar on the spray wand (2).
2. Insert the spray tip (11) onto the spray wand (2).
3. Release the quick-connect collar to attach the spray tip
(11).
4. Pull on spray tip (11) to ensure it is properly installed and
does not pull out.
10
APPLICATION
Green - Narrow fan tip (25° )
• The green pressure washer tip pro-
vides high versatility with its 25 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
age many surfaces. This pressure
washer tip is designed for "sweep-
ing" foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
White - Wide fan tip (40° )
• The white 40 degree tip, referred to
as the "fan" tip creates the widest
area of cleaning with relatively low
pressure. This pressure washer tip is
best used for light or delicate clean-
ing applications. It is recommended
for light cleaning on wood decks and
other soft or delicate surfaces.
Black - Soap spray tip
• The black soap spray tip, is used for
soap application. Soap is applied un-
der low pressure high volume for op-
timum performance. Soap cannot be
applied under high pressure with this
machine.
Turbo nozzle tip
• The nozzle rotates in a zero to 15 de-
gree spray pattern in a circular mo-
tion to break down tough dirt and
grime. The spray pattern can cover
area of 4 to 8 inches wide, depending
on a distance between the tip and the
surface being cleaned.