Festool RTSC 400 Li Guide D'utilisation page 9

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6 SERVICE
a. Have your power tool serviced by a qualified re-
pair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.
b. Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
c. Only use original Festool parts for repair and
maintenance. The use of incompatible accesso-
ries or spare parts can result in electric shocks or
other injuries.
Machine-related safety instructions
– Dust that is harmful to your health may be pro-
duced as you work (e.g. paint products contain-
ing lead and some types of wood). Contact with
or inhalation of this dust may pose a risk for the
operating personnel or persons in the vicinity.
Observe the safety regulations that apply in your
country.
Wear a P2 respiratory mask to protect your
health. In enclosed spaces, ensure that
there is sufficient ventilation and connect an
extraction system.
Always wear protective goggles to protect
against sanding hazards.
– Clean work equipment soaked in oils, for exam-
ple sanding pad or polishing felt, with water and
allow to dry. Work equipment soaked in oil may
combust spontaneously.
– Attention: Risk of fire! Avoid overheating the
grinding material and the sander. Always empty
the dust container before taking a break. Swarf
in the filter bag or filter of the mobile dust ex-
tractor may self-ignite in unfavourable condi-
tions such as flying sparks when grinding metals.
Particular danger exists if the swarf is mixed with
paint, polyurethane residue or other chemical
materials and the grinding material is hot after
long periods of work.
– If the power tool is dropped or falls, check for
damage to the machine and sanding pad. Re-
move the sanding pad for closer inspection.
Have the damaged parts repaired before
use.Broken sanding pads and damaged ma-
chines can cause injuries and machine instabili-
ty.
– Always use original Festool sanding pads.
– While using the long-life dust bag be aware of
electric charge. Always when possible use an
antistatic suction hose with the power tool. A
slight electric shock may cause you to panic
briefly and become distracted, which may result
in an accident.
– Only use the mains adapter with this device.
– Only use the mains adapter together with an
original Festool plug-it cable.
Battery pack and charger safety instruc-
– This charger can be operated by persons with re-
duced physical, sensory or mental capabilities or
a lack of practical experience and knowledge,
provided they are supervised or have been in-
structed to use the machine safely and under-
stand the dangers of machine operation.
Children are not allowed use or play with the ma-
chine.
– Do not open the battery pack or the charger!
– Prevent metal parts (e.g. metal chips) or fluids
from entering the charger!
– Do not use power adapters or battery packs
form other manufacturers to operate the cord-
less power tool. Do not use any charger from
other manufacturers for charging the battery
pack. The use of impermissible accessories may
result in electric shock and / or serious acci-
dents!
– Protect the battery pack from excessive heat > 50
°C or constant heat sources such as sunlight or
naked flames!
– Never use water to extinguish burning li-ion bat-
tery packs! Use sand or a fire blanket.
– Check the plug and the cable regularly and
should either become damaged, in order to avoid
a hazard, have them replaced by an authorised
after-sales service workshop.
– Always pull the mains plug out of the socket
when the charger is not in use.
Health hazard by dust
WARNING! Various dust created by power
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some ex-
amples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically treated
lumber.
tions
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dtsc 400 li

Table des Matières