Hansgrohe E 04228 0 Série Instructions De Montage / Mode D'emploi / Garantie page 6

4 mm
3.
6
2. 4.
1.
3.
1.
5 mm
English
Flush the hot and cold supplies - shower
only
(1) Remove the dust cover.
(2) Open the cold stop using a 4 mm Allen
wrench.
(3) Allow the cold supply to flush for at least five
minutes.
(4) Close the cold stop.
2.
(1) Remove the flushing block using a 5 mm Allen
wrench. Turn it 90° and reinstall.
(2) Open the hot stop.
(3) Allow the hot supply to flush for at least 5
minutes.
(4) Close the hot stop.
2.
Flush the hot and cold supplies
- tub/shower
(1) Remove the dust cover.
(2) Open both stops using a 4 mm Allen wrench.
Allow the hot and cold supplies to flush for at
least 5 minutes.
2.
4.
4.