Hansgrohe E 04228 0 Série Instructions De Montage / Mode D'emploi / Garantie page 10
Masquer les pouces
Voir aussi pour E 04228 0 Série:
Publicité
English
Measure the distance from the front of the plaster
shield to one of the screw-in flanges ("X").
Add ½" to this measurement.
Cut each screw so that it is X + ½" long.
Open the stops using a 4 mm Allen wrench (1).
4 mm
Install the carrier plate (2).
Install the carrier plate screws.
1
2
10
Publicité
