Abus TVIP51500 Manuel Utilisateur page 119

Common Name:
Validity:
Note: When using a self-signed certificate, you may receive a warning message from your
browser. Self-signed certificates are always classed as insecure by the browser as the source
certificate and authorisation of the certification authority are both absent.
Accept the settings by pressing "OK" or cancel them by pressing "Cancel".
IP Filter
Specific IP areas can be authorised or blocked for camera access in this configuration menu:
IP Filter:
Allow Range:
Start IP Address:
End IP Address:
Add:
Allow Range List:
Delete:
Deny Range:
Start IP Address:
End IP Address:
Add:
Deny Range List:
Delete:
Maximum length of 32 characters (A-Z, a-z, 0-9).
Enter how long the certificate remains valid here (0-1000 days).
Activates or deactivates the IP filter.
Make the settings for IP areas that are permitted to access the network
camera here.
Start address for an approved IP area.
End address for an approved IP area.
The data is added to the list of approved areas.
List of all approved IP areas.
An area can be removed from the list by selecting it and then pressing the
"Delete" button.
Make the settings for IP areas that are not permitted to access the network
camera here (blocked access).
Start address for a blocked IP area.
End address for a blocked IP area.
The data is added to the list of blocked areas.
List of all blocked IP areas.
An area can be removed from the list by selecting it and then pressing the
"Delete" button.
119
English