Installation And Operation; Installation - Bartscher 40x30 Plus 150342 Notice D'utilisation

5. Installation and operation

5.1 Installation

•
Unpack the device and remove the packing material.
CAUTION!
Never remove the nameplate and warning signs from the device.
•
Put the device on an even, stable, dry and waterproof surface which is resistant to
high temperature.
•
Never place the device on an inflammable surface.
•
Never place the device near open flame, electric heaters, heating furnaces or other
heat source.
•
Never place the device at the edge of a table to avoid tilting or falling.
•
Never put the device in a moist or wet area.
•
Place the device so that the plug is easily accessible so as to quickly disconneet the
device if the need arises.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device only
in case of compliance!
Connect the device only to properly installed single socket with
protective terminal.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
- 27 -