Publicité
Les langues disponibles
Les langues disponibles
IDENTIFICATION OF PARTS
1. Control panel
2. Cold air outlet
3. Signal receptor
4. Remote controller
5. Transport handle
6. Air outlet hose
7. Evaporator air intake
8. Primary drain port
9. Power supply
9
6
1
2
3
4
7
8
INSTALLATION
Select the best location
• Beside a window, a door or a french window.
• Keep the required distance from the return air outlet to the wall or other obstacles at least
60cm.
• Fix one end of the air hose on the air outlet on the backside of the appliance.
• Extend the air hose to ensure that other end of the air hose has clearance between the win-
dow, door or french window, or wall hole.
• Air outlet or intake can not be blocked by protective grid or any obstacle.
Install exhaust hose and adapter
5
1. Extend the air exhaust duct by drawing out the two ends of the duct.
2. Screw the air exhaust duct into the connector of air exhaust duct.
3. Connect the connector of air exhaust duct to the unit.
1
Remote control
Inserting batteries
1. Open the back cover;
2. Put the batteries inside the slot, with anode and cathode
in right directions;
3. Put on the back cover.
1 CR2025 battery (not included)
46 47
2
3
Publicité
