Honda EG3600CL Manuel De L'utilisateur page 55

11/04/26 16:16:27 32Z30600_055
Two Wheel Kit Installation
1. Install the two wheels on the axle shaft using the plain washers and
split pins.
2. Install the axle assembly on the generator using four 8
flange bolts and 8 mm flange nuts.
3. Install the two stands on the under frame using four 8
flange bolts.
TORQUE: 24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft)
8 16 mm FLANGE BOLT (8) ×
WHEEL (2)
STAND (2)
− −
8 mm FLANGE NUT (4)
−
LONGER
UNDER FRAME
AXLE SHAFT
20 mm
PLAIN WASHER (2)
4 28 mm ×
SPLIT PIN (2)
× 16 mm
× 16 mm
GENERATOR
SIDE
53