Table des Matières
Publicité
11/04/26 16:13:45 32Z30600_039
1.
CHANGING OIL
Drain the oil while the engine is still warm to assure rapid and
complete draining.
1.
Remove the oil drain bolt and sealing washer, remove the oil filler
cap, and drain the oil.
2.
Reinstall the drain bolt and new sealing washer. Tighten the bolt
securely.
3.
Refill with the recommended oil (see page
OIL FILLER CAP
Wash your hands with soap and water after handling used oil.
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.
17
SEALING
WASHER
UPPER LIMIT
OIL DRAIN BOLT
) and check the oil level.
37
Publicité
Table des Matières
