Initial Use - Beurer MG 800 Mode D'emploi

Function light status
Function light flashes yellow
Function light shows steady yellow = Charging complete
Function light flashes red

6. Initial use

Note
Before using the Fascia-ReleaZer
mum of 2.5 hours. Proceed as follows:
• Connect the charging cable to the mains adapter and the Fascia-ReleaZer
(Figure 1). Then insert the mains adapter into a suitable socket. Alternatively,
you can also charge the Fascia-ReleaZer
USB port on your computer or laptop (Figure 2).
Whilst charging, the function light flashes yellow. When the Fascia-ReleaZer
is fully charged, the function light shows steady yellow. The battery will last
for approx. 11 hours of operation when fully charged. Charge the Fascia-
ReleaZer again as soon as the function light flashes red during operation.
®
Charging function (charg-
ing cable plugged in)
= Charging
= Low battery
for the first time, let it charge for a mini-
®
with the charging cable via the
®
29
®
®