DeWalt DW073 Mode D'emploi page 33

• The battery fluid, a 25-30% solution of potassium
hydroxide, can be harmful. In case of skin
contact, flush immediately with water. Neutralize
with a mild acid such as lemon juice or vinegar.
In case of eye contact, rinse abundantly with
clean water for at least 10 minutes.
Consult a physician.
• Never attempt to open a battery pack for any
reason.
Labels on charger and battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
100%
Battery charging
100%
Battery charged
Battery defective
Do not probe with conductive objects
Do not charge damaged battery packs
Read instruction manual before use
Use only with D
E
others may burst, causing personal injury
and damage
Do not expose to water
Have defective cords replaced
immediately
+40 ˚c
+4 ˚c
Charge only between 4 °C and 40 °C
Discard the battery pack with due care
for the environment
23
WALT battery packs,
Do not incinerate the battery pack
Labels on tool
For a complete reproduction of the labels attached
to the tool, refer to the summary in the back of the
manual. The labels on the tool show the following
pictographs:
Read instruction manual before use
Laser warning
Bump warning
Battery charged
Battery low
Package contents
The package contains:
1 Rotary laser
1 Target card
1 Pair of glasses
1 Kitbox
1 Charger, DE9108 (DW073K)
1 Charger, DE9116 (DW073KH)
1 Battery pack, 18V, 2.0 Ah, Nicd (DW073K)
1 Battery pack, 18V, 3.0 Ah, NiMH (DW073KH)
1 Instruction manual
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
The rotary laser DW073 has been designed to
project laser lines to give support to professional
applications. The tool can be used both inside and
outside for horizontal (level) and vertical (plumb)
alignment. The tool can also produce a stationary
laser dot that can be directed manually to establish
or transfer a mark.
E N G L I S H
en - 3