The Cut-Sheet Feeder installed on top of the printer is operated by a signal
from the printer to drive the pulse motor and feed the Cut-Sheets into
printer automatically.
are:
The features
1. Paper size
Size range:
2. The Cut-sheet can be set manually to feed sheet by sheet (manual
override function).
3.
Paper shortage can be detected by software control.
4.
Print start position can be set anywhere within the printable area.
GENERAL
Narrow ................. CSF (80 columns) 3390-S, 3390-D
Height .................. 182-356 mm (7.2 to 14 inches)
3390-D Rear bin .... 195-356 mm
Width ................... 182-216 mm (7.2 to 8.5 inches)
Wide .................... CSF (136 columns) 3391-S, 3391-D
Height .................. 182-364 mm (7.2 to 14.3 inches)
3391-D Rear bin .... 195-364 mm (7.7 to 14.3 inches)
Width ................... 182-364 mm (7.2 to 14.3 inches)
(7.7
to 14 inches)