Page Margins - Oki Data Microline 3320 Manuel De L'utilisateur

CUT-SHEET FEEDER
This moves the paper in very fine increments 1/180 inch on ML 3390/3391
or 1/144 inch on ML 3320/3321 to
form precisely.
The location at which Fine Line Feed is completed will be stored in the
printers memory as the top of
when the printer is turned off or unplugged until you reset
If no paper is inserted, pressing the SHIFT+ TOF button sets the top of
form position to 0.85 inch from the top of the page, the default setting for
the Cut-Sheet Feeder.

Page Margins

For best results we recommend that you maintain minimum page margins
as shown in the diagram
your word processing file, keep in mind that the CSF, automatically inserts
a 0.16 inch left margin.
Applications which require reverse line feed may not print well in the
bottom two inches of paper.
Owners!:
Wide Carriage Printer
data
you send to the printer is only eight inches wide (80 columns at 10
data will be printed on the platen.
be
exact -
form. The location will
below. When you set up the page margins for
When the CSF 3390-S or 3390-D is
so you can position the top of
be
retained even
it.
be
installed,
cpi). Otherwise, the
sure that any