Oki Data Microline 3320 Manuel De L'utilisateur page 18

CUT-SHEET FEEDER
9. Install the loading tray sheet support(s) at the back of the loading
tray(s). To do this, hold the support
forwards and slide it over
slide onto the plate tray at the rear.
Install the paper stack
10.
do this, hold the support
slide it down into the
11. Close the access
the square
support (front sheet support) in the
with its ridged surface facing forward and
slots at either side of stacker.
cover.
with the ridged surface facing
crossbar, the slots in the back
stacker. To