Oki Data Microline 3320 Manuel De L'utilisateur page 13

Keep the carton and packaging material in case you ever need to store or
transport the Cut-Sheet Feeder.
Before you install and start printing with your Cut-Sheet Feeder, familiar-
ize yourself with all its components:
1. The CSF feeds paper to the printer from the paper stacks in the se-
lected loading trays. Completed paper is collected in the stacker at the
front.
2. The mounting bracket attaches the CSF to your printer. It can be
adjusted on CSF 3390-S/3390-D to fit the wide carriage printers. This is
easy to do, all you'll need is a #2 Phillips screwdriver.
3. The feeder cable connects the CSF to the printer.
The feeder moves paper to the printer from the paper stack in the Cut-
Sheet Feeder hopper. The output tray collects the printed papers. The
feeder cable connects the Cut-Sheet Feeder with the printer.
The CSF is operated using the printer's control buttons or by means of
programming commands explained in Appendix
1. INSTALLATION
A.