Operation; Precautions For Setting The Paper - Oki Data Microline 3320 Manuel De L'utilisateur

CHAPTER 2 OPERATION

Precautions for Setting the Paper

1. Always use a good quality paper (standard pound paper) of 60 to 90
2
g/m (16 to 24 pound) weight.
2. The Cut-Sheet Feeder can accommodate a paper stack of up to 16 mm
in total thickness (170 sheets of 16 lb paper).
3. A single solid sheet can be handled. Do not use multiple-part paper.
4. Always load paper of the same weight into one hopper to make sure
the sheets feed properly.
5. Do not use folded, dog-eared, creased or distorted sheets.
6. Do not feed sheets of several different sizes at the same time.
7. Set sheets properly into the hopper to bring the lowermost sheet into
contact with the stopper.
8. When the paper set lever is turned to the "SET" position, make sure
the right and left stoppers are firmly on the paper. The paper set lever
must be gently turned toward the "SET" position to prevent the
stopper from flipping the sheets out of place.
9. Do not leave paper in the hopper for a long time. The sheets may curl
due to change in temperature or humidity.
10. Store packed paper on a flat surface in a cool, dry place until needed.
After a package is opened, store the unused paper in a plastic bag to
protect it from humidity.