How To Modify The Attachment Assembly (For Use Of A Csf 3390-S Or 3390-D On Ml 3321/3391) - Oki Data Microline 3320 Manuel De L'utilisateur

CUT-SHEET FEEDER
10. Complete the Cut-Sheet Feeder installation steps.
How to modify the attachment assembly
(from ML3390 to ML3391)
1. Remove the screws
B
The plate will come off the sheet guide
2. Fit the projections
the plate B.
3. Tighten the screws
A .
D
on the sheet guide
A .
C.
C E
into the holes on