Description Of The Hood & Controls; Controls - Elica EGL436S1 Mode D'emploi

Description of the hood & Controls
1 Control panel
2 Grease filter
3 Grease filter release handle
4 Halogen lamp (position and nr. of lamps
may vary)
5 Sliding Glass
6 Hood canopy

Controls

Use the high suction speed in cases of
concentrated
recommended that the cooker hood suction
is switched on for 5 minutes prior to cooking
and to leave in operation during cooking and
for another 15 minutes approximately after
terminating cooking.
Description of control panel
A B
A - Lighting: dim lighting / full lighting /off
(loop control) - Works even with hood
in stand by and/or drawer closed.
B - Set Fan in Stand by (LED on the
lower side of the display ON).
C - ON/OFF Timer for selected speed
(visualizes the speed selected and
flashing LED on the lower side of the
display).
This knob permits the operation of the
cooker hood for a established period:
20 minutes if the speed selected is 1
15 minutes if the speed selected is 2
10 minutes if the speed selected is 3
5 minutes if the boost speed P is
selected.
D - Display showing: fan speed (1-2-3-
P), filter saturation indicator (F for
metal filter, C for charcoal filter)
Note: if in posses of the Remote
Control (see paragraph "List of
Part and Accessories") the display
shows a flashing "b" this to indicate
that the remote control battery
must be replaced.
When the led in the lower right side is
on, it indicates that the cooker hood
is ready for operation ("standby"
position), the flashing LED indicates
that the timer has been activated for
selected speed.
Warning!
The Charcoal filter saturation function
16
kitchen vapours.
C D E F
It is