Explanation Of Symbols - BEHAbelt PPuls HP01 Mode D'emploi

1.0 Explanation of symbols

Symbols used on the device and in the operating manual and their respective meanings:
Attention! Warning of a potential danger, follow operating instructions.
Caution! Hazardous voltage, danger of electric shock.
Caution! Hot surface.
Note. Please read carefully.
Protection Class I according to DIN EN 61140 (VDE 0140-1). All electrical conductive
housing parts are connected to the protective conductor PE.
Continuous double or reinforced insulation.
Mark of conformity, acknowledges compliance with the applicable EU directives.
Symbol for the marking of electrical and electronic equipment (WEEE Directive)
Please make sure to follow below:
The operating instructions contain information and references required for safe
operation and use of the instrument.
Before using the instrument, read the operating instructions carefully and follow them in all
respects.
Failure to follow the instructions or to comply with warnings and references may
result in life-threatening injuries to the user and damage to the instrument.
28