Denon RCD-M33 Mode D'emploi page 10

ENGLISH
!0
MENU/ SET button
• When pressed in the standby mode, the
standby mode is switched (the clock
display is switched on and off).
• When pressed while the clock is
displayed, the manual time setting mode
is set. (This cannot be set while the clock
is displayed in the standby mode.)
• Switches the display of the timer setting
menu on and off.
• When the function is set to FM and the
CT tuning mode is set, the mode
switches to the auto time setting mode.
• When the function is set to TUNER and
an FM station is being received, if
pressed for more than 1 second, the
display switches to the AUTO PRESET
menu.
!1
ENTER/ MEMO button
• Press this button to enter editing settings.
• Press this button to preset memory.
!2
8 /CH–
(automatic search) button
In CD function :
• Move to the beginning of current Track or
previous Track.
In TUNER function :
• Use this button to recall preset stations
on the tuner.
!3
6 /TU–
(manual search / rewind) button
In CD function :
• The manual search operation
performed.
In TUNER function :
• Use this button to selecting the station.
In TAPE function :
• Press this button to rewind the front side
of the tape. (The back side of the tape is
fast-forwarded.) Also use this button to
search for the beginning of the current
selection when playing in the forward (
direction, or to search for the beginning of
the following selection when playing in
the reverse ( 0 ) direction.
!4
SDB /TONE button
• Press this button to adjust SDB (Super
Dynamic Bass) and TONE.
!5
DIMMER button
• Use this to adjust the brightness of the
main unit's display. Can be switched in 4
steps, from OFF to always on.
10
!6
DAB/ RDS button
• Use this button to automatically tune to
stations using the radio data system.
RDS PTY TP
OFF
!7
0 (reverse play) button (TAPE)
• Not supported.
!8
1
(forward play) button (TAPE)
• Not supported.
!9
2 (stop) button (TAPE)
• Not supported.
@0
1 3 (play/pause) button (MD)
/
• Not supported.
@1
PTY button
• Press this button after selecting "PTY"
with the RDS button to select one of the
24 program types.
@2
CLOCK button
• Press this to switch the clock display
between on and off.
@3
TIME/ DISPLAY button
For audio CDs with the function set to CD:
• Press this button during the play or pause
mode to switch the time display.
elapsed time remaining time
per track for the track
total remaining time
on the disc
(During programmed playback, indicate
is
the total remaining time of the
programmed tracks.)
For MP3/WMA discs containing track
information with the function set to CD:
• Press this button during the play or pause
mode to switch the track information.
file name Title / Artist
Title / Album
1
)
With the function set to TUNER, and in the
FM and RDS modes:
• Press to switch the display below.
frequency (PS) PTY
RT CT
PS:This is displayed when the radio station
currently being received is one named
using the procedure described in "P13 –
Presetting or naming radio stations".
@4
9 /CH+
(automatic search) button
In CD function :
• Move to the beginning of Next Track.
In TUNER function :
• Use this button to recall preset stations
on the tuner.
@5
7 /TU+
(manual search / fast-forward) button
In CD function :
• The manual search operation
performed.
In TUNER function :
• Use this button to selecting the station.
In TAPE function :
• Press this button to fast-forward the front
side of the tape. (The back side of the
tape is rewind.) Also use this button to
search for the beginning of the following
selection when playing in the forward (
direction, or to search for the beginning of
the current selection when playing in the
reverse ( 0 ) direction.
@6
MUTE button
• Mutes the speaker output. When
operated while the output is muted, the
mute mode is canceled.
@7
2 (stop) /BAND button
• In CD function, press this button to stop
playback.
• In TUNER function, use this button to
selecting the band.
FM AUTO FM MONO
AM
@8
VOLUME button
• Use these buttons to adjust the volume.
• The volume increases when the • button
is pressed and decreases when the ª
button is pressed.
@9
CD 1 3 (play/pause) button
/
• Press this button to play or pause of the
CD player.
#0
CLEAR/ DEL button
In CD function :
• Press this button to clear the track from
the program.
In TUNER function :
• Press this button to erase the station
name.
#1
FOLDER MODE button
• For MP3/WMA discs with the function set
to CD, switches the play mode between
disc and folder.
#2
REPEAT button
• Press this button for repeat playback.
#3
RANDOM button
• Press this button to set the tracks in
random order.
#4
LINE button
• Press this button to switch the function
is
LINE .
The input changes in the following order
each time this button is pressed.
TAPE AUX
#5
POWER ON button
• Use this switch to turn on the power of
1
) the entire system.