Adjusting The Handle; Technical Data - WAGNER SUPER FINISH 23 PRO Mode D'emploi

GB
DESCRIPTION OF UNIT
3.4

ADJUSTING THE HANDLE

Swing the handle (1) upwards (the sleeves fall downwards and
secure the handle in the terminal position).
1
Push the sleeves (2) upwards in order to swing the handle
down again if necessary.
2
Transportation in vehicle
Secure the unit in the vehicle by means of suitable fasteners.
The device can be placed on its side if necessary. In this case,
please ensure that no attachments can be damaged. Atten-
tion: Paint or solvent residues can escape from the connec-
tions!
42
3.5

TECHNICAL DATA

Voltage :
Fuses :
Unit connecting line :
Max. current consumption:
Degree of protection :
Rated input of device:
Max. operating pressure :
Max. volume flow :
Volume flow at 12 MPa
(120 bar) with water :
Max. temperature of the
coating material :
Max. viscosity :
Empty weight :
Hydraulic oil filling
quantity :
Hydraulics housing
Gears (grease)
Max. vibration at the spraygun : lower than 2.5 m/s²
Max. sound pressure level:
*Place of measurement: 1 m distance from unit and 1.60
m above floor, 12 MPa (120 bar) operating pressure,
reverberant floor
Super Finish 23 Pro
230 -240 V AC, 50 Hz
16 A time-lag
6 m long, 3 x 1.5 mm²
7.0 A
IP 54
1.3 kW
25 MPa (250 bar)
2.6 l/min
2.3 l/min
43 °C
20,000 mPas
27 kg
1.3 liter
45 g
75 dB (A)*