Residual Risks - AHT ATHEN Manuel D'utilisation

AHT Cooling Systems GmbH
•
Cutting injuries in the case of material breakage. Danger of falling.
►Do not climb onto or into the device.
•
Falling objects. Impact injury. Cutting injury in the case of glass breakage.
►Do not place objects on the device.
•
Leakage of defrosted water. Slipping hazard.
►Check for puddle formation in front of and below the device.
►Remove spilled defrosted water immediately.
•
Closing the glass cover. Hands (parts of your body) can be jammed.
►During closing, do not reach into the opening gap.
►When closing, pay attention to other people.
Safety when handling glass
• Glass breakage hazard. Cutting injuries to the body. Impact injury.
►Do not install devices with multi-pane insulating glass at altitudes above 2,000 m.
pane insulating glass can break due to air pressure differences.
►Do not apply any load to the glass cover.
►Check for damage (crack, fissure, breakage) of the glass cover / glass elements. In the
event of damage, contact the maintenance service immediately (see → Chapter 10.5).
►Do not climb onto or into the device.
►The storage of glass containers in freezers is forbidden.
►Check for breakage of stored glass containers (refrigerators).
•
Disposal of broken glass. Cutting injuries to hands.
►Wear protective gloves to remove splintered glass parts and the goods that may have been
damaged.
►Remove all splintered glass parts and damaged goods carefully and completely.
Dispose of splintered glass parts in an environmentally-friendly manner.

Residual risks

The manufacturer assumes no liability whatsoever for damage that has been caused by non-observance of this
manual.
on18.05.2018 11:08
CAUTION
CAUTION
361929_0917_BA_SM_V4_06.09.2017_U_enUS_DRUCK.docx
Multi-
Page 39