Wolf DF304 Guide D'utilisation Et D'entretien page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OVEN OPERATION
Proof
Setting controls for 30" and 36" ovens:
Rotate selector bezel to BAKE.
1
Turn oven control knob left until 'PrF' is displayed, then
2
release.
Oven temperature is preset to 85°F
3
to select preset temperature or turn control knob to
change temperature. Display alternates between set
temperature and 'PrF.'
Dehydration
Accessory kit required. Accessories are avail able through an
authorized Wolf dealer. For local dealer information, visit the
find a showroom section of our website, wolfappliance.com.
Setting controls:
Place door stop supplied with accessory kit, onto oven
1
door lock.
Rotate selector bezel to
2
Turn oven control knob left until 'dEH' is displayed, then
3
release.
Oven temperature is preset to 110°F
4
ENTER to select preset temperature or turn control knob
to change temperature. Display alternates between set
temperature and 'dEH.'
. Touch ENTER
(30°C)
CONV
.
. Touch
(45°C)
Temperature Probe
The temperature probe measures the internal temperature
of food while cooking. It can be used with all cooking
modes except broil and convection broil.
Setting controls:
Rotate selector bezel to desired cooking mode.
1
Touch ENTER to select preset temperature or turn con-
2
trol knob to change temperature.
Insert probe into the thickest area of food. When making
3
bread, cook for approximately 10 minutes before
inserting probe.
When preheat is complete, use a pot holder to lift probe
4
receptacle cover, then insert probe. Refer to the illustra-
tion below.
Probe temperature is preset to 160°F
5
ENTER to select preset temperature or turn control knob
to change temperature. Display alternates between oven
set temperature and actual probe temperature. To alter-
nate between probe set point and actual probe tempera-
ture, press PROBE. Temperatures below 70°F
displayed as 'Lo.'
An audible chime indicates internal temperature has
6
reached probe set point. Remove, then reinsert probe to
verify internal temperature.
CAUTION
Probe and probe receptacle will be very hot. Handle
with care.
Probe receptacle.
. Touch
(70°C)
are
(20°C)
|
wolfappliance.com
13

Publicité

Table des Matières
loading

Table des Matières