JVC KW-AVX820 Mode D'emploi page 18

Menu item
AV Input * 10
Camera Input *
External Input *
Beep
Telephone Muting *
Illumination
Motion Sensitiv.
Initialize
* 10
Not selectable when "AV-IN" is selected as the source.
18
You can determine the use of LINE IN and VIDEO IN plugs. (
♦
Off
♦
iPod (Off)
♦
Audio&Video
♦
Audio
♦
Navigation
11, 12
* For connecting a rear view camera to the CAMERA IN plug on the rear.
♦
Off
♦
On
13
For connecting an external component to the CD changer jack on the rear.
• For connecting Satellite radio interface and Smart Digital Adapter, this
setting is not required. They are automatically detected.
♦
Changer/iPod *
♦
External
♦
Off
♦
On
♦
15
Off
♦
Muting1,
Muting2
You can turn off the lights of the monitor panel buttons while turning on the
unit. ( 7)
♦
Normal
♦
Proximity/
Motion
♦
Touch Panel
Change the sensitivity of the sensor for <Illumination> (above).
♦
Low, Mid, High
Initialize all settings you have made in <AV Menu>. Press and hold [Enter]
to initialize the settings, then reset the unit. (
Selectable setting/item
: Select when no component is connected ("AV-IN"
is skipped while selecting the source).
: Select when connecting the iPod/iPhone using the
USB Audio and Video cable for iPod/iPhone. (
48)
: Select when connecting an AV component such as
a VCR.
: Select when connecting an audio component such
as a portable audio player.
: Select when connecting a Navigation System. (
50)
: Select when no rear view camera is connected to
the CAMERA IN plug.
: Select when connecting the rear view camera to
the CAMERA IN plug. The picture from the camera
is displayed as it is taken.
14
: CD changer, ( 44), iPod, (
: Any other than the above, (
: Cancels.
: Activates the key-touch tone.
: Cancels.
: Select either one which mutes the sounds while
using the cellular phone.
: Always light.
: Monitor panel buttons light up when your finger
moves closer to the touch panel.
: Monitor panel buttons light up when your finger
touches the touch panel.
50)
49).
51).
3)