Philips GC4444 Mode D'emploi page 14

EnGlISh
1
7 Hold the iron over the sink, press and hold the Calc-Clean button
and gently shake the iron to and fro (Fig. 15).
Steam and boiling water come out of the soleplate. Impurities and
,
flakes (if any) are flushed out.
 Release the Calc-Clean button as soon as all the water in the tank
has been used up.
Repeat the Calc-Clean process if the iron still contains a lot of impurities.
after the Calc-Clean process
1 Put the plug back into the wall socket and let the iron heat up to
let the soleplate dry.
 Unplug the iron when it has reached the set ironing temperature.
 Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
 Let the iron cool down before you store it.
Storage
1 Set the steam control to position 0 and unplug the iron.
 Empty the water tank (Fig. 16).
 Let the iron cool down in a safe place.
 Wind the mains cord and fix it with the cord binder (Fig. 17).
5 Store the iron on its heel on a stable surface.
heat-resistant protective cover (GC4444, GC4440 only)
You can store the iron on the heat-resistant protective cover immediately
after ironing. It is not necessary to let the iron cool down first.
Do not use the heat-resistant protective cover during ironing.
1 Put the iron on the heat-resistant protective cover (Fig. 18).
 Insert the tip of the soleplate into the heat-resistant protective
cover (1) and then press down the heel of the iron ().